Paint Protection Film (PPF) in Boca Raton
A clear urethane skin over your factory paint. It takes the rock chips, the love-bug acid and the Florida sun so the paint underneath does not. Four coverage levels, two film tiers, prices published on this page — PPF from $1,000.
How much of
the car.
Four coverage levels, each available in either film tier. What you read here is what we quote.
| Coverage | What is filmed | Essential · NAR H190 | Signature · 3M Pro 200 |
|---|---|---|---|
| Partial Front | Full bumper, partial hood & fenders, mirrors | From$1,000 | From$1,150 |
| Full Front Most popular | Full hood, full fenders, bumper, mirrors | From$1,900 | From$2,150 |
| Track Pack | Full front + rocker panels + A-pillars + leading roof edge | From$2,600 | From$2,900 |
| Full Body | Every painted panel | From$4,995 | From$5,600 |
Both tiers are installed to the same protocol and carry the same 1-year SERRES installation warranty on top of the film manufacturer's own. Bigger or heavily contoured vehicles — trucks, SUVs, wide-body — are quoted on the car. See every service and price.
What this coast
does to paint.
Every one of these is a South Florida problem before it is a paint problem. Film is the layer that takes them instead of your clear coat.
I-95
rock chips
Six lanes of traffic flicking gravel at your hood and bumper on every commute. The film absorbs the strike; the paint under it never knows.
UV and
sun fade
Florida sun works on clear coat all year, not for one summer. The film's top coat carries the UV load and keeps the gloss where it started.
Love bug
season
Twice a year they arrive in clouds and what they leave behind is acidic. Off film they wash away; off bare clear coat they etch.
Sand and
salt air
Wind-blown sand sandblasts the leading edges — bumper, mirrors, A-pillars — and coastal salt sits on everything else. Those are the exact panels every coverage level starts with.
Five steps,
no shortcuts.
The same protocol our Barcelona studio runs. Nothing gets skipped because a car is booked tight.
-
01
Wash & decon
Two-bucket wash, iron fallout remover, clay. Anything still on the paint ends up sealed under the film for years, so nothing is left on it.
-
02
Paint inspection, thickness gauge
We read the paint panel by panel with a thickness gauge and photograph what we find. Respray, filler or thin clear coat changes the plan — and you hear about it before we start, not after.
-
03
HEPA-filtered install bay
The car moves into a HEPA-filtered, anti-static bay. Airborne dust trapped under film is the single most common reason a panel has to come back off.
-
04
Install
Pattern cut for your exact model, edges wrapped in wherever the panel allows, filtered-air dry, then a panel-by-panel review under controlled light. A panel that is not right is redone before you see the car.
-
05
Warranty & aftercare
You leave with the manufacturer film warranty — up to 10 years — plus a 1-year SERRES installation warranty covering lifting, bubbling and edge failure, and a written aftercare sheet for the first wash, the edges and which chemicals to keep away.
Cars we
have filmed.
Work from our Barcelona studio. Same films, same protocol, same hands — now opening in Boca Raton.
PPF, made clear.
What we get asked before protecting a car. If your case is different, message us on WhatsApp.
Will paint protection film turn yellow?
No. Both films we install are TPU, not the old PVC film that yellowed in the sun. Essential is NAR H190 PPF and Signature is 3M Scotchgard Pro Series 200, and each carries its manufacturer's own warranty against yellowing, cracking and staining. Manufacturer film warranty (up to 10 years) + 1-year Serres installation warranty.
Does the film really heal its own scratches?
Yes, within limits. The top coat is self-healing: swirl marks and light wash scuffs close up with heat from the sun or warm water. A deep gouge that cuts right through the film does not heal - but it stopped at the film instead of at your paint, which is the point.
What exactly does the warranty cover?
Manufacturer film warranty (up to 10 years) + 1-year Serres installation warranty. The film manufacturer covers the film itself against defects such as yellowing, cracking, bubbling and delamination. Our year covers the installation: lifting edges, trapped dirt, anything that is our work rather than the film.
How long does the car stay with you?
One to three days for most cars, depending on coverage. A partial front or full front is usually a single day. Track Pack and full body need two to three, because every panel is decontaminated and inspected before any film is laid. The exact number of days for your car comes with the quote.
How do I look after a filmed car?
Wash it like paint, just more gently. Hand wash with a pH-neutral shampoo, keep a pressure washer off the film edges, and leave polishes, waxes and anything abrasive out of it.
Can the film be removed later?
Yes - film is designed to come off. With heat and slow, controlled pulling it lifts away without taking the clear coat with it, which is exactly why owners film a car before they sell it. Film left on long past its warranty life gets harder to remove, so do not leave a failing panel on the car.
Tell us the car.
We price it exactly.
Make, model and year change the pattern and the price. Send those and you get the real number for your car, not a range.
- Prices exclude FL sales tax.
- “From” pricing = real price for a standard sedan in good condition — no bait pricing.
- Manufacturer film warranty (up to 10 years) + 1-year Serres installation warranty.
- Booking secured with a 30% deposit.