Two services, priced openly. Interior Detail from $300 — full strip-down, extraction, leather clean and feed. Paint Correction (1–2 stage) from $600 — compound, polish, and gloss measured in and out.
No ladder of packages you have to decode. An interior detail, and a paint correction. Both quoted from the same list everyone else sees.
From$300
Full interior strip-down, extraction, leather clean & feed. Every panel, vent and seam steamed and agitated; carpets and upholstery extracted; leather cleaned and conditioned.
Vehicle size and how much has built up set the final number — confirmed at intake, before any work starts.
From$600
Compound + polish, swirl and hologram removal, gloss measured in and out. A third finishing stage is available when the paint asks for it.
Also the prep step before film — the finish gets sealed at its best, not as found.
Both prices are on the full price list. Terms below apply.
Ground-in dust, dull plastics and tired leather — steam-cleaned, conditioned and reset until the cabin feels factory again.
A full decontamination wash lifts road film and fallout, then we dry and dress every panel until the paint reads wet under the lights.
A full inside-and-out reset — we remove what's built up, clean down to the surface, then dress and protect every finish.
A pH-neutral foam bath lifts loose grime, then clay and iron remover pull out the bonded road film and brake fallout a wash leaves behind.
Inside, every panel, vent and seam is steamed and agitated; carpets and leather are extracted and wiped down until the cabin is truly clean.
Paint is sealed for gloss and beading, trim and leather are conditioned and UV-protected, and the glass gets a rain-repellent treatment and is left streak-free.
No two paints are alike. Our listed correction covers one to two stages; a third finishing pass is quoted separately when the clear coat needs it.
The aggressive stage — levelling deeper scratches, swirls and oxidation by removing a precise micron-thin layer of clear coat.
The haze and micro-marring left by cutting are refined away, building back clarity and lifting gloss across the panel.
The final mirror-finish (jewelling) pass eliminates holograms and brings the paint to a true, defect-free gloss before it is sealed in.
Gloss is read with a meter and expressed in GU (gloss units): the higher the number, the deeper and sharper the reflection. A typical result on neglected paint, measured in and out:
What people ask before a detail — prices, timings and how we work in Boca Raton.
There are two services and two numbers. An Interior Detail starts at $300 and a Paint Correction, one to two stage, starts at $600. “From” pricing = real price for a standard sedan in good condition — no bait pricing. Prices exclude FL sales tax.
A full interior strip-down, hot extraction of carpets and upholstery, and leather cleaned and fed. Every panel, vent and seam is steamed and agitated, trim and glass are finished by hand, and the car goes back with nothing left to wipe. Vehicle size and how much has built up are what move the final number, and we confirm it at intake before any work starts.
Correction is machine polishing that removes defects rather than hiding them. Stage 1 cuts, levelling swirls, scratches and oxidation. Stage 2 refines away the haze that cutting leaves. Stage 3 is a final jewelling pass for a show finish. The listed price covers one to two stages, which is what most daily-driven cars need, and a third stage is quoted separately when the clear coat asks for it. Gloss is read with a meter before and after, so the result is a number: a typical neglected panel goes from about 42 GU on arrival to about 94 GU after correction. It is also the right prep step before paint protection film, so what the film preserves is the paint at its best rather than as found.
Interior condition and paint condition are what move the price, and both are read at intake. Send the make, model and year and say which of the two services you are after.
Prefer a page with everything on it? See the full price list or use the contact page.
Send your make & model — exact quote within 2 hours.